Skip to content
Greater Geelong, the Bellarine and nearby Surf Coast towns

Small second homes in Geelong, explained after the 80 m² change

From 15 October 2026, Victoria’s planning definition of a “small second dwelling” — the official term for what most people still call a granny flat — rose from 60 square metres to 80. That extra room of flexibility is already out of date on many builder websites. This guide sets out the current state-wide rules, the overlay and lot-size catches that still apply in the City of Greater Geelong, and a way to request a match with one or more registered builders.

Last updated 20 November 2026.

  • Registered-builder matching
  • No charge to enquire
  • Planning notes, not a permit

The current headline, in one panel

Amendment VC306, in effect from 15 October 2026, increased the maximum floor area for a small second dwelling to 80 square metres. It also clarified how that floor area is measured and removed a duplicated planning pathway requirement. A building permit is still normally required. A planning permit is often not required in residential and rural zones, but it can be, especially on lots under 300 square metres or where bushfire, flood, heritage or other overlays apply. Confirm both with a planning property report and with council or a registered building surveyor — not with this website alone.

Guides on this site

How builder matching works

  1. You send a short description of the block (suburb, approximate lot size, and whether you already have a planning property report).
  2. We pass the enquiry to one or more independent registered builders who work in Greater Geelong or on the Bellarine.
  3. They contact you to talk about feasibility and, if you wish, a quote. You can decline at any point.

We are not a builder, building surveyor, architect or town planner. In Victoria, domestic building work over $16,000 must be carried out by a registered builder. We do not issue permits and we do not promise that a particular design will be approved.

Why Geelong is a distinctive place to plan one

Greater Geelong includes a 19th-century city core with heritage overlays, a flood-aware river and waterway network around the Barwon and Moorabool, grassfire and bushfire-prone edges at Lara and some hinterland lots, and a huge growth front at Armstrong Creek, Marshall and Charlemont. The Bellarine towns add coastal and landscape overlays. A rule that is straightforward on a clear, 500-square-metre residential lot in Grovedale can be a different project two suburbs over. That is why this site is organised around eligibility and process, not around a single floor plan.

Where we take matching requests

Enquiries come from Geelong, Geelong West and Newtown, Belmont, Highton, Grovedale and Waurn Ponds, Armstrong Creek and the southern growth area, Lara, Leopold and Drysdale, and from Ocean Grove (City of Greater Geelong) and Torquay. Torquay sits in Surf Coast Shire, which has its own planning scheme — see the eligibility checklist and the Torquay guide. After you submit, a builder will say whether they cover that town.

  • Geelong
  • Belmont
  • Highton
  • Grovedale
  • Waurn Ponds
  • Lara
  • Ocean Grove
  • Torquay
  • Drysdale
  • Leopold
  • Armstrong Creek
  • Newtown
  • Geelong West
  • Corio
  • Marshall
  • Charlemont

Suburb and town guides

Common questions about granny flats and small second dwellings in Geelong

Are you a granny flat builder in Geelong?
No. We are an independent matching service. We are not a builder, building surveyor, architect or town planner. We connect you with one or more registered builders who quote under their own registrations. In Victoria, domestic building work over $16,000 must be carried out by a registered builder.
Does the 80 m² cap apply in Armstrong Creek, Lara and Torquay?
Yes. The state-wide small second dwelling definition applies, including the 80 square metre limit from 15 October 2026. Overlays, covenants and, in Torquay, the Surf Coast planning scheme still have to be checked for the actual address. Start with the suburb guides and the rules page.
Is Ocean Grove in the same council as Torquay?
No. Torquay is in Surf Coast Shire. Ocean Grove is in the City of Greater Geelong. Name the town and the council on the form. The Torquay page explains the difference.
Will this form approve my planning or building permit?
No. A request is not a planning assessment and it does not approve a permit. Pull a planning property report at planning.vic.gov.au, and speak to council or a registered building surveyor about the address.

Request a builder match

Tell us about your block and what you have in mind. We will pass your enquiry to one or more registered builders who work in Greater Geelong or on the Bellarine. This is not a planning assessment and it does not approve a permit.

Ready to test whether an 80 m² small second dwelling could work on your Geelong or Bellarine block? Send a request and we will match you with one or more registered builders who know the local planning and building steps.

Request a Builder Match
Planning a small second home? Request a match with a registered builder who works around Geelong. Request a Builder Match